Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with Welcome to Supertechnical!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
Diaphragm Seals
Diaphragm Seal
• A Diaphragm Seal is a device consisting of a diaphragm welded (or firmly clamped) between two suitable flanges and properly gasketed to prevent leakage of liquid or gas. It is a dividing membrane or a thin partition, acts as a barrier to a liquid or gas that may tend to clog or corrode the sensing element of a pressure instrument
D10 PVC 2-PIECE DIAPHRAGM SEAL
APPLICATIONS:
· Provides an economical solution to
protect instruments from corrosion and clogging
· Used to isolate and protect a
pressure instrument on ultra-pure or highly corrosive fluid lines
· Can be used with liquids such as
demineralized water, sulphuric acid, hydrochloric acid and caustic gases (such
as corrosive air and ammonia), where such fluids will corrode metal instruments
· Review of chemical compatibility is available upon request
D15 THREADED FLUSH MOUNT DIAPHRAGM SEAL
APPLICATIONS:
· Suitable for any process where freezing or
solidification of the pressure media is a concern
DESCRIPTION & FEATURES:
· Constructed with a welded diaphragm placed at the
end of the male NPT connection, eliminating the normal diaphragm chamber where
solidification of the process media may render the seal inoperable
·
Rugged and suitable for the most severe process
applications
· ASME B40.100 compliant
D20 SANITARY DIAPHRAGM SEAL
APPLICATIONS:
· D20 may be attached to any Winters all SS gauge for
sanitary installations.
DESCRIPTION & FEATURES:
· Meets the requirements of dairy, food, beverage,
chemical and pharmaceutical industries
· 3A approved
· ASME B40.100 compliant
D30
HIGH PRESSURE DIAPHRAGM SEAL
APPLICATIONS:
· Offers protection for pressure instruments (gauges
and transmitters) from corrosive, contaminated or viscous media
· Ideally suited for applications where space
limitations exist
DESCRIPTION & FEATURES:
· Compact, lightweight and economical
· Constructed of AISI 316 stainless steel and is
welded together into a one piece unit
· ASME B40.100 compliant
D40 MEDIUM DUTY DIAPHRAGM SEAL
APPLICATIONS:
· Ideally suited for applications where space
limitations exist
· Primarily utilized to protect gauges and
transmitters from corrosive media
· Utilized in many OEM applications
DESCRIPTION & FEATURES:
· Compact (one piece), lightweight and economical
· ASME B40.100 compliant
D44 FLANGED DIAPHRAGM SEAL PTFE
APPLICATIONS:
· Used in industrial applications such as oil
refineries, pulp and paper mills and chemical plants
DESCRIPTION & FEATURES:
· “Continuous use” seals–backing plate will prevent
diaphragm from rupturing if pressure sensing instrument fails. Pressure will be
held until instrument is replaced
· Various sizes and housing materials available
· ASME B40.1 compliant
D44 FLANGED DIAPHRAGM SEAL WELDED
APPLICATIONS:
· Used in industrial applications such as oil
refineries, pulp and paper mills and chemical plants
DESCRIPTION & FEATURES:
· “Continuous use” seals–backing plate will prevent
diaphragm from rupturing if pressure sensing instrument fails. Pressure will be
held until instrument is replaced
· Various sizes and housing materials available
· ASME B40.100 compliant
D46 FLANGED FLUSH MOUNT SEAL
APPLICATIONS:
· Oil refineries, pulp and paper mills, chemical
plants
· Where media buildup is a concern
DESCRIPTION & FEATURES:
· One-piece design–no internal gaskets or o-rings
· Diaphragm is flush to the gasket sealing surface so
no internal cavities for media buildup
· Various sizes available
· ASME B40.100 compliant
D70 HEAVY DUTY 2-PIECE INDUSTRIAL DIAPHRAGM SEAL
APPLICATIONS:
· Where the process fluid is corrosive or viscous and
would clog instrument internals/solidify within the pressure gauge, switch or
transmitter
DESCRIPTION & FEATURES:
· Two piece construction and designed to withstand
even the most severe process applications
· “Continuous use” seals–backing plate will prevent
diaphragm from rupturing if pressure sensing instrument fails. Pressure will be
held until instrument is replaced
· Diaphragm is separable for servicing and is
available with a 1/8” NPT or 1/4” NPT flushing connection for removing any
material which may clog the process connection
· Standard diaphragm is constructed of AISI 316L
stainless steel and welded to the upper chamber of the seal for pressures 30
psi (200 kPa) and above; optional Viton diaphragm available for ranges
from 30” Hg Vacuum (-100 kPa) up to 100 psi (690 kPa). Others diaphragms
available
· FKM is highly recommended for applications less
than 10 psi
Diaphragm Seal
• A Diaphragm Seal is a device consisting of a diaphragm welded (or firmly clamped) between two suitable flanges and properly gasketed to prevent leakage of liquid or gas. It is a dividing membrane or a thin partition, acts as a barrier to a liquid or gas that may tend to clog or corrode the sensing element of a pressure instrument
D10 PVC 2-PIECE DIAPHRAGM SEAL
APPLICATIONS:
· Provides an economical solution to
protect instruments from corrosion and clogging
· Used to isolate and protect a
pressure instrument on ultra-pure or highly corrosive fluid lines
· Can be used with liquids such as
demineralized water, sulphuric acid, hydrochloric acid and caustic gases (such
as corrosive air and ammonia), where such fluids will corrode metal instruments
· Review of chemical compatibility is available upon request
D15 THREADED FLUSH MOUNT DIAPHRAGM SEAL
APPLICATIONS:
· Suitable for any process where freezing or
solidification of the pressure media is a concern
DESCRIPTION & FEATURES:
· Constructed with a welded diaphragm placed at the
end of the male NPT connection, eliminating the normal diaphragm chamber where
solidification of the process media may render the seal inoperable
·
Rugged and suitable for the most severe process
applications
· ASME B40.100 compliant
D20 SANITARY DIAPHRAGM SEAL
APPLICATIONS:
· D20 may be attached to any Winters all SS gauge for
sanitary installations.
DESCRIPTION & FEATURES:
· Meets the requirements of dairy, food, beverage,
chemical and pharmaceutical industries
· 3A approved
· ASME B40.100 compliant
D30
HIGH PRESSURE DIAPHRAGM SEAL
APPLICATIONS:
· Offers protection for pressure instruments (gauges
and transmitters) from corrosive, contaminated or viscous media
· Ideally suited for applications where space
limitations exist
DESCRIPTION & FEATURES:
· Compact, lightweight and economical
· Constructed of AISI 316 stainless steel and is
welded together into a one piece unit
· ASME B40.100 compliant
D40 MEDIUM DUTY DIAPHRAGM SEAL
APPLICATIONS:
· Ideally suited for applications where space
limitations exist
· Primarily utilized to protect gauges and
transmitters from corrosive media
· Utilized in many OEM applications
DESCRIPTION & FEATURES:
· Compact (one piece), lightweight and economical
· ASME B40.100 compliant
D44 FLANGED DIAPHRAGM SEAL PTFE
APPLICATIONS:
· Used in industrial applications such as oil
refineries, pulp and paper mills and chemical plants
DESCRIPTION & FEATURES:
· “Continuous use” seals–backing plate will prevent
diaphragm from rupturing if pressure sensing instrument fails. Pressure will be
held until instrument is replaced
· Various sizes and housing materials available
· ASME B40.1 compliant
D44 FLANGED DIAPHRAGM SEAL WELDED
APPLICATIONS:
· Used in industrial applications such as oil
refineries, pulp and paper mills and chemical plants
DESCRIPTION & FEATURES:
· “Continuous use” seals–backing plate will prevent
diaphragm from rupturing if pressure sensing instrument fails. Pressure will be
held until instrument is replaced
· Various sizes and housing materials available
· ASME B40.100 compliant
D46 FLANGED FLUSH MOUNT SEAL
APPLICATIONS:
· Oil refineries, pulp and paper mills, chemical
plants
· Where media buildup is a concern
DESCRIPTION & FEATURES:
· One-piece design–no internal gaskets or o-rings
· Diaphragm is flush to the gasket sealing surface so
no internal cavities for media buildup
· Various sizes available
· ASME B40.100 compliant
D70 HEAVY DUTY 2-PIECE INDUSTRIAL DIAPHRAGM SEAL
APPLICATIONS:
· Where the process fluid is corrosive or viscous and
would clog instrument internals/solidify within the pressure gauge, switch or
transmitter
DESCRIPTION & FEATURES:
· Two piece construction and designed to withstand
even the most severe process applications
· “Continuous use” seals–backing plate will prevent
diaphragm from rupturing if pressure sensing instrument fails. Pressure will be
held until instrument is replaced
· Diaphragm is separable for servicing and is
available with a 1/8” NPT or 1/4” NPT flushing connection for removing any
material which may clog the process connection
· Standard diaphragm is constructed of AISI 316L
stainless steel and welded to the upper chamber of the seal for pressures 30
psi (200 kPa) and above; optional Viton diaphragm available for ranges
from 30” Hg Vacuum (-100 kPa) up to 100 psi (690 kPa). Others diaphragms
available
· FKM is highly recommended for applications less
than 10 psi