Parker

Parker offers a range of low, medium, and high pressure filters. All three options filter out ingressed contamination before it reaches a valve or cylinder, blocking pump-generated debris before it compromises the system. Modern hydraulic systems are demanding. Better hydraulic controls and long com..

Parker

Depending on working pressures and applications, Parker coupling systems are being offered in hardened steel or brass. In addition, numerous series can be supplied as standard in stainless steel. Whether under water, in aerospace, on the high seas, on the street, or in industry – our quick connect c..

Parker

Parker Fluid Control Division (FCD) is a world-wide industry leader of solenoid valves that control motion, flow and pressure in a wide variety of applications in all markets. Since 1947, it has built a strong reputation as a recognized leader in solenoid valve technology and design – first as Skinn..

Parker

An O-ring is a torus, or doughnut-shaped ring, generally molded from an elastomer, although O-rings are also made from PTFE and other thermoplastic materials, as well as metals, both hollow and solid. O-rings are used primarily for sealing. The various types of O-ring seals are described in this sec..

Parker

Full featured particulate and coalescing filters, regulators, filter/regulators, and lubricators are available with a wide range of standard options to meet air preparation needs. It is available in three body sizes with either BSPP, BSPT, or NPT to accommodate thread type requirements. Individual u..

Parker

Parker believe that the best hose for your operation is the one that gets the job done right — no more, no less. That’s why we offer you a comprehensive line of hoses, as well as all the options that go with it. We’ve got rubber hoses that are an exceptional value and hoses made specifically for hig..

Parker

These fittings provide users with numerous connection options for a wide variety of tube materials without the need for tube threading or soldering. This range guarantees excellent long-term sealing and performance...

Parker

Parker offers a diverse selection of pneumatic valves to meet customer application needs, with distribution services and product support worldwide. They design and manufacture a wide range of pneumatic controls designed to operate in the demanding environments, ranging from aerospace to mining and m..

Parker

Process filtration for Oil&Gas and Chemical IndustriesIndustrial Process Filtration Division can supply a wide range of filter cartridges and filter vessels suitable for the demands of oil & gas, chemical, Paints & speciality coatings industries.Filter VesselsParker is a leading pro..

Parker

Parker Triple-Lok fittings meet the strict requirements of SAE J514 and ISO 8434-2 industry standards for 37° flare fittings. Its design is simple. It uses an easily produced flare at the tube end to seal and hold fluid under high pressure. The design of Triple-Lok fittings is very efficient. The fi..

Parker

2, 3 and 5 Valve Manifolds – (Block & Bleed) Parker's manifold valve offers superior performance with a comprehensive range of remote and direct mount manifolds to suit all types of instrumentation installations, specifications and applications.Product OverviewParker's remote and dire..

Parker

Tube Fitting ,Two Ferrule Compression Fitting - A-LOK® SeriesParker's two ferrule compression fittings, A-LOK® Tube Fittings are designed for leak-free connections in process instrumentation and industrial applications. Available in a wide range of materials, they are compliant to NORSOK M-650 a..

Parker

Air Distribution Manifold  Hi Pro Manifold Series Parker’s Hi-Pro series distribution manifolds are supplied as an interconnected assembly utilising Parker Hi-Pro ball valves with two shut-off functions in one body, mounted on a base plate. Each valve has a 10 mm bore. Unlike many oth..

Parker

Angle Seat ValvesParker’s Angle Seat Valve is actuated by a pneumatically driven piston and is capable to handle slurry solutions with particles or corrosive solutions at high temperature up to 180°C, operating pressures to 16 Bar and flow rates from 78 l/min to 1167 l/min. Markets • Food &..

Parker

Trunnion Mount Ball Double Block and Bleed Valve (DBB)Pro-Bloc® FP SeriesFloating Ball Double Block and Bleed (DBB) Parker’s Pro-Bloc® FP series valve with floating ball design utilising both soft seats or metal seats for bubble-tight sealing at a wide range of pressures and temperatures. T..

Parker

Change Over System - Continuous Gas ManagementCOSE Series The ChangeOver System (COSE) is a compact turnkey module that assists the operator with their total gas management. The COSE maintains a continuous gas delivery from two separate sources allowing for maximum cylinder gas usage from one so..

Parker

Check ValvesHi-Check Non Return Check Valve (10,000 PSI) Parker's high performance non-return valves can offer the user a cold working pressure rating up to 10,000 psi/689 bar maximum, with a cracking pressure of 10 psi maximum. Parker’s Hi Check series high performance non-return valves ar..

Parker

It is essential to conduct on-site condition monitoring in order to certify fluid cleanliness levels, to help prevent catastrophic failures in critical systems with early detection, to comply with customer cleanliness requirements and specifications, and new equipment warranty compliance. Parker bec..

Parker

Tube Fitting,Single Ferrule Compression Fitting - CPI™ SeriesParker’s single ferrule compression fittings, CPI™ Tube Fittings are designed to effectively seal and also resist vibration and thermo-cycling conditions in process, and instrumentation system connections. Available in a wide range of ..

Parker

Diaphragm Seal•  A Diaphragm Seal is a device consisting of a diaphragm welded (or firmly clamped) between two suitable flanges and properly gasketed to prevent leakage of liquid or gas. It is a dividing membrane or a thin partition, acts as a barrier to a liquid or gas that may tend to clo..

Parker

Flange Connector (Flange to Tube Fitting)  Parker’s One-piece integral connectors allow the user to switch from piping flange standards to instrumentation compression with minimum cost and added safety. This system eliminates the need of additional connections.Parker’s Flange to Tube ..

Parker

Metering ValvesNS Series Metering ValvesThe Parker NS Series of metering valves are designed to provide accurate and stable control of flow rates in analytical, instrumentation, and research applications. A variety of connection sizes, body patterns and materials of construction provide conside..

Parker

Monoflange Process to Instrument ValveParker's Monoflange is designed to replace conventional multiple-valve installations currently in use for interface with pressure measuring systems in process control applications.  Product OverviewBy combining customer-specified valves into a singl..

Parker

Tube Fitting, Inverted Two ferrule Compression - MPI SeriesParker's MPI™ Series is an inverted two ferrule design engineered and manufactured to provide secure, tight, and leak resistant connections for small bore instrumentation applications up to 15,000 PSI.Product OverviewParker MPI™ Fittings..

Parker

Needle ValvesHNV Series  - 10,000 PSI Needle ValveGlobe style Bar stock needle valves are purpose designed valves for operation with any fluid up to 10,000 psi (689 bar) rating. Complete with standard PTFE gland packing and self-centering non-rotational tip, gives the user assurance of total..

Parker

Snap Trap Tube ClampsSnap-Trap®+ 6Mo instrumentation tube clamp, designed to simplify the installation and maintenance of instrumentation tubing. Utilising Parker's instrumentation grade tube with its range of tube fittings will help with your asset integrity program. Snap-Trap®+ is an in..

Parker

Permanent Ferrule Less Tube Fittings - Phastite® Series Parker's Phastite® permanent compression fitting offers an extremely quick, easy and simple way of permanently connecting tube. When considering how much time it takes to weld tubing, Phastite® delivers a huge reduction in total installa..

Parker

Pipe Fittings - Instrumentation Designed as leak free pipe connections for instrumentation and general industrial applications.These pipe fittings offer superior performance in various applications ranging from 3,000 to 10,000 psi.Product OverviewParker's Pipe Fittings deliver superior perfor..

Parker

Shaped products (elbows, tees and crosses) are hot forged and machined, while straights are manufactured from cold drawn barstock. Where applicable, these products are made in conformance with the design criteria of the Society of Automotive Engineers Standards, SAE J514, J530. Parker Fluid Connecto..

Parker

Plug ValveRising Plug Valve, 10,000 PSI - H SeriesThe Parker rising plug valve offers complete customer system compatibility that reduces installation time and potential leak paths. The rising plug valve operates a straight through flow path which is ideal for handling viscous fluids. The soft se..

Parker

Parker is the leading global manufacturer of Pneumatic cylinders and actuators for industrial equipment applications. Their cylinders have proven to be the most reliable and cost effective on the market, and their rotary actuators offer the industrial equipment designer unique solutions for developi..

Parker

Modular Valve - ProBloc SeriesParker's ProBloc series is designed to replace conventional multiple-valve installations currently in use for interface with pressure measuring systems in process control applications. Product OverviewParker’s ProBloc series modular valves are designed to repla..

Parker

..

Parker

..

Parker

Push-Lok and Push-on hosesParker's self-grip hose system Push-Lok for low pressure applications features the widest fluid compatibility, application and size range in the industry. The Push-Lok self-grip system is easy to use. No clamps or special tools are required during installation. And wit..

Parker

Relief ValvesH SERIES PROPORTIONAL RELIEF VALVE 6,000 PSI The valves offer a choice of 14 different ranges of opening (or ‘cracking’) pressures, from 10-25 to 4,975-6,000 PSI (0.7-1.7 to 343-414 bar). A low friction stem seal and a balanced poppet design ensures accurate and consistent cracki..

Parker

Sample Conditioning System, IntraFlow SeriesParker’s IntraFlow modular fitting and valve system was developed specifically for analytical, lab and other complex general purpose instrumentation flow control systems. These compact systems meet ISA/ANSI SP76.00.02 requirements.Product OverviewParke..

Parker

Sample Cylinders & AccessoriesSample CylindersParker stainless steel and aluminum sample cylinders provide safe containment for storage and transportation of both liquids and gases. These cylinders are DOT rated to 1800 psig (124 bar) at 70 °F (21 °C). Applications include hydrocarbon samplin..

Parker

Parker Fluid Control Division (FCD) is a world-wide industry leader of solenoid valves that control motion, flow and pressure in a wide variety of applications in all markets. Since 1947, it has built a strong reputation as a recognized leader in solenoid valve technology and design – first as Skinn..

Parker

Clamps - Series A, Light Series (DIN 3015-1)EO-Tube Clamps according DIN 3015-1 for normal mechanical requirements are available in nine standard sizes. – Outer tube diameter for the metric series 4 to 101.8 mm – Outer tube diameter for the inch-size series R 1/8˝ to R 3½˝ – Outer tube diameter..