Actuators

  • Rs. 0.00

    • Product Code: ST-PI19

            

    Apollo AE Series -Electric Actuator

    Ruggedly built and designed for easy installation, new Apollo AE Series electric actuators deliver the most standard features and performance in their class. Now CSA listed all sizes as standard

    FIVE OUTPUT TORQUES, ONE HOUSING

    • 200, 400, 600, 800 and 1,000 inch-pounds

    • Long service life

    • Anodized die cast aluminum housing

    • Fiberglass reinforced nylon cover resists corrosion

    • Nitrile gasket and seals cover all penetration points in housing and cover

    • Precision cut and heat treated alloy spur gears

    • Permanently lubricated enclosed gear train

    • NEMA 4, 4X

     

    EASY TO USE

    Two separate 1/2” NPT conduit entrances for easier wiring and signal separation

    • 12-position pre-wired terminal strip includes standard connections for remote open/closed position indicators; lots of room for wiring options

    • Unrestricted mounting orientation

    • Built-in thermal overload protection in all AC motor actuators

    • Limit switches have an 11-amp rating at 115 VAC

    • High visibility valve position indicator standard on all models

      

    Apollo AS/AD Series - Pneumatic Actuator

    Ruggedly built and designed for easy installation, new Apollo Spring return or double acting, quarter turn, rack and pinion actuator deliver the most standard features and performance in their class.

     

    TORQUE RANGE

     

    • Double-Acting: 119 to 38510 lbf-in (13.4 to 4338 Nm) at 80 psig (5.5 barg)

    • Spring-Return: 41 to 15867 lbf-in (5 to 1793 Nm) spring end torque at maximum spring set.

     

    PRESSURE RANGE

     

    • Double-Acting: 29 to 120 psig (0.2 to 8.3 barg)

    • Spring-Return: 87 to 120 psig (6 to 8.3 barg), with maximum spring set 43.5 to 120 psig (3 to 8.3 barg), reduced spring quantity

     

    PRESSURE MEDIA

     

    • Air, dry, or lubricated and inert gases

    • Dew point at least 10K below ambient temperature

    • For sub-zero applications, take appropriate measures

    • Mentioned pressure levels are “gauge pressures”. Gauge pressure is equal to absolute pressure minus atmospheric pressure.

     

    CYCLE LIFE

     

    • Normal working life is 500,000 cycles according to EN15714-3, where 1 cycle is 1 open stroke and 1 close stroke

     

    TEMPERATURE RANGE

     

    • Standard: -4°F to 176°F (-20°C to 80°C)

    • Option:

                   Low temperature: -40°F to 176°F (-40°C to 80°C)

        High temperature: +14°F to 250°F (-10°C to 120°C)

     

            

    Apollo AE Series -Electric Actuator

    Ruggedly built and designed for easy installation, new Apollo AE Series electric actuators deliver the most standard features and performance in their class. Now CSA listed all sizes as standard

    FIVE OUTPUT TORQUES, ONE HOUSING

    • 200, 400, 600, 800 and 1,000 inch-pounds

    • Long service life

    • Anodized die cast aluminum housing

    • Fiberglass reinforced nylon cover resists corrosion

    • Nitrile gasket and seals cover all penetration points in housing and cover

    • Precision cut and heat treated alloy spur gears

    • Permanently lubricated enclosed gear train

    • NEMA 4, 4X

     

    EASY TO USE

    Two separate 1/2” NPT conduit entrances for easier wiring and signal separation

    • 12-position pre-wired terminal strip includes standard connections for remote open/closed position indicators; lots of room for wiring options

    • Unrestricted mounting orientation

    • Built-in thermal overload protection in all AC motor actuators

    • Limit switches have an 11-amp rating at 115 VAC

    • High visibility valve position indicator standard on all models

      

    Apollo AS/AD Series - Pneumatic Actuator

    Ruggedly built and designed for easy installation, new Apollo Spring return or double acting, quarter turn, rack and pinion actuator deliver the most standard features and performance in their class.

     

    TORQUE RANGE

     

    • Double-Acting: 119 to 38510 lbf-in (13.4 to 4338 Nm) at 80 psig (5.5 barg)

    • Spring-Return: 41 to 15867 lbf-in (5 to 1793 Nm) spring end torque at maximum spring set.

     

    PRESSURE RANGE

     

    • Double-Acting: 29 to 120 psig (0.2 to 8.3 barg)

    • Spring-Return: 87 to 120 psig (6 to 8.3 barg), with maximum spring set 43.5 to 120 psig (3 to 8.3 barg), reduced spring quantity

     

    PRESSURE MEDIA

     

    • Air, dry, or lubricated and inert gases

    • Dew point at least 10K below ambient temperature

    • For sub-zero applications, take appropriate measures

    • Mentioned pressure levels are “gauge pressures”. Gauge pressure is equal to absolute pressure minus atmospheric pressure.

     

    CYCLE LIFE

     

    • Normal working life is 500,000 cycles according to EN15714-3, where 1 cycle is 1 open stroke and 1 close stroke

     

    TEMPERATURE RANGE

     

    • Standard: -4°F to 176°F (-20°C to 80°C)

    • Option:

                   Low temperature: -40°F to 176°F (-40°C to 80°C)

        High temperature: +14°F to 250°F (-10°C to 120°C)

     

    Write a review

    Note: HTML is not translated!
       Bad           Good
    ×