Actuators

  • Rs. 0.00

    • Product Code: PI-0029

    Pneumatic Actuators

    Tomoe TG-S Type

    The TG-S type spring return pneumatic actuator is suitable for on/off control for medium and large sized valves. With an optional positioner, it can also be used for flow control. Air pressure and the spring force the piston inside the cylinder into a linear reciprocating motion, causing the pin coupled to the piston rod to rotate the output shaft

    Tomoe TGA Type

    The TGA model is a double-action pneumatic actuator perfect for on/off control of the various types of butterfly valves. With an optional positioner, it can also be used for flow rate control. It mainly used for the medium to large-sized valves of size 350mm or more. The operation principle is that air pressure forces the piston inside the cylinder into a linear reciprocating motion, causing the trunnion coupled to the rod to drive the arm and rotate the output shaft

    Tomoe 3C Actuator

    The 3C actuator is a vertical cylinder suitable for installations where space is limited. The piston rotates while moving vertically which causes the output shaft to rotate at the same time to open and close the valve. Air control devices such as limit switches and solenoid valves, and manual devices can be installed.


    Motorized Actuators


    Tomoe LTKD Actuator

    The LTKD type is a motorized actuator suitable mainly for valve sizes 350A and higher, and uses three-phase 200 V and 400 V power supplies. In addition to on-off control, it can be used for slotring control because of its built-in electric positioner (seitroller). It also supports special specification requirements.

    Pneumatic Actuators

    Tomoe TG-S Type

    The TG-S type spring return pneumatic actuator is suitable for on/off control for medium and large sized valves. With an optional positioner, it can also be used for flow control. Air pressure and the spring force the piston inside the cylinder into a linear reciprocating motion, causing the pin coupled to the piston rod to rotate the output shaft

    Tomoe TGA Type

    The TGA model is a double-action pneumatic actuator perfect for on/off control of the various types of butterfly valves. With an optional positioner, it can also be used for flow rate control. It mainly used for the medium to large-sized valves of size 350mm or more. The operation principle is that air pressure forces the piston inside the cylinder into a linear reciprocating motion, causing the trunnion coupled to the rod to drive the arm and rotate the output shaft

    Tomoe 3C Actuator

    The 3C actuator is a vertical cylinder suitable for installations where space is limited. The piston rotates while moving vertically which causes the output shaft to rotate at the same time to open and close the valve. Air control devices such as limit switches and solenoid valves, and manual devices can be installed.


    Motorized Actuators


    Tomoe LTKD Actuator

    The LTKD type is a motorized actuator suitable mainly for valve sizes 350A and higher, and uses three-phase 200 V and 400 V power supplies. In addition to on-off control, it can be used for slotring control because of its built-in electric positioner (seitroller). It also supports special specification requirements.

    Write a review

    Note: HTML is not translated!
        Bad           Good
    ×