Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with Welcome to Supertechnical!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
Tube Benders
Parker Hydraulic Tube Bender &
QSS Hydraulic Preset Tool
Hydraulic tube bender for Autoclave
Engineer's tubing.
The Parker Autoclave Engineers hydraulic tube bender is designed
for 1/4" to 1" heavy wall tubing and provide fast, accurate and
reliable bending with only one setup. The tube bender is complete with pump,
cylinder, frame and bending shoes which are self contained in a portable,
lockable case. (Order number: HTB)
FEATURES
•Single
stage hydraulic hand pump.
•Quick
release pivot pins.
•One-piece
shoe locking pin.
•Rugged
bending frame.
•Precision
one-piece bending shoes.
BENEFITS
Parker Autoclave Engineer’s tube bender comes
complete with pump, cylinder, frame and bending shoes which are self contained
in a portable, lockable case. Designed for use on site, or as a manufacturing
tool this coning and threading toll is a necessity where tube bending is a
requirement. This hydraulic tube bender is designed for use with 1" to
1/4" tubing, it is a must for tubing 9/16" and above.
QSS - Hydraulic Pre-Set Tool
Hydraulic Sleeve Set Tool (HST-912)
• The hydraulic set
tool requires minimal assembly and is easy to use. There are three models
available; a manual hydraulic pump, an air operated hydraulic pump and a
complete stand mounted system with air pumps and tooling for all five
connection sizes.
• The HST-912 Parker Autoclave hydraulic sleeve set tool
is designed for use with the QS Series glands, sleeves and Parker Autoclave
tubing. This tool is required to set the sleeve for the 9/16" and
3/4" sizes and recommended for the 1/4" and 3/8" sizes. It not
only produces the required bite into the tubing, it is much easier than trying
to set the sleeve the conventional method. The tool comes in a self contained
portable, lockable case complete with hand or air pump, cap and dies for all
sizes up to 3/4".
• Complete machine for all tubing sizes
up to 3/4” O.D.
• Includes all tube ferrule set dies
required
• Hydraulic Set Tools can be operated
vertically or rotated for long length tubes
• Individual hydraulic set tool kits
can be ordered separately Small = ¼” to
¾” tubing sizes, Large = 1” tubing
• Torque wrench and adapters included
Parker Hydraulic Tube Bender &
QSS Hydraulic Preset Tool
Hydraulic tube bender for Autoclave
Engineer's tubing.
The Parker Autoclave Engineers hydraulic tube bender is designed
for 1/4" to 1" heavy wall tubing and provide fast, accurate and
reliable bending with only one setup. The tube bender is complete with pump,
cylinder, frame and bending shoes which are self contained in a portable,
lockable case. (Order number: HTB)
FEATURES
•Single
stage hydraulic hand pump.
•Quick
release pivot pins.
•One-piece
shoe locking pin.
•Rugged
bending frame.
•Precision
one-piece bending shoes.
BENEFITS
Parker Autoclave Engineer’s tube bender comes
complete with pump, cylinder, frame and bending shoes which are self contained
in a portable, lockable case. Designed for use on site, or as a manufacturing
tool this coning and threading toll is a necessity where tube bending is a
requirement. This hydraulic tube bender is designed for use with 1" to
1/4" tubing, it is a must for tubing 9/16" and above.
QSS - Hydraulic Pre-Set Tool
Hydraulic Sleeve Set Tool (HST-912)
• The hydraulic set
tool requires minimal assembly and is easy to use. There are three models
available; a manual hydraulic pump, an air operated hydraulic pump and a
complete stand mounted system with air pumps and tooling for all five
connection sizes.
• The HST-912 Parker Autoclave hydraulic sleeve set tool
is designed for use with the QS Series glands, sleeves and Parker Autoclave
tubing. This tool is required to set the sleeve for the 9/16" and
3/4" sizes and recommended for the 1/4" and 3/8" sizes. It not
only produces the required bite into the tubing, it is much easier than trying
to set the sleeve the conventional method. The tool comes in a self contained
portable, lockable case complete with hand or air pump, cap and dies for all
sizes up to 3/4".
• Complete machine for all tubing sizes
up to 3/4” O.D.
• Includes all tube ferrule set dies
required
• Hydraulic Set Tools can be operated
vertically or rotated for long length tubes
• Individual hydraulic set tool kits
can be ordered separately Small = ¼” to
¾” tubing sizes, Large = 1” tubing
• Torque wrench and adapters included