Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with Welcome to Supertechnical!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
Low /Medium Pressure Tubes
Tubing, Autoclave
Series - 20,000 PSI
Parker Autoclave's medium pressure tubing is capable of operating to 20,000 psi (1379 bar) and range in size from 1/16" to 1 1/2" tube size. Standard tubing is available in cold worked stainless steel
Parker
Autoclave's medium pressure cone and thread tube nipples are designed for use
with Parker Autoclave fittings and valves. These cone and thread tube nipples
are rated up to 20,000 PSI (1379 BAR). These manufactured, high quality tube
nipples are for rapid system installation make-up.
Parker Autoclave
supplies pre-cut, coned-and-threaded nipples in various sizes and lengths for
Autoclave high pressure valves and fittings. In addition to the standard
lengths listed in the catalog, nipples are available in any custom length.
Consult factory for further details.
Note: Caution
should be exercised when selecting medium pressure nipples since two series are
available: 15000 psi (1034.16 bar) and 20000 psi (1379 bar).
Markets:
• Oil and Gas
• Petrochemical
• Research
• Chemical
Features/Benefits:
• Working
pressures to 20,000 psi (1379 bar)
• Pre-cut cone
and thread connections designed to permit rapid installation
• Tubing sizes
are 1/4", 3/8", 9/16", 3/4", and 1-1/2"
• Tube nipples
are manufactured from cold worked 316 stainless steel
• Operating
temperatures from -423ºF (-252ºC ) to 1200ºF (649ºC)
• Available in
special materials
• Stock nipple
lengths from 3.0" (76.2 mm) to 12.0" (304.8 mm)
Applications:
• Medium Pressure
Test Panels
• Offshore Skid Panels
• Chemical
Injection
• Medium Pressure
Gas Systems
Application |
Hydraulic,
Instrumentation, Media Transfer, Suction / Vacuum |
Specifications
Met |
ASTM,
ISO |
Materials
of Construction |
6Mo,
904L, Alloy 625, Alloy 825, Alloy C-276, Duplex, Monel, Other Stainless
Steel, Stainless Steel, Super Duplex, Titanium |
Maximum
Operating Pressure |
34
(and over) bar, up to 34 bar, up to 7 bar, 500 and over psi, up to 100 psi,
up to 500 psi |
Maximum
Operating Temperature |
240
and over °C, up to 100 °C, up to 125 °C, up to 150 °C, up to 240 °C, up to
650 °C, up to 1200 °F, up to 212 °F, up to 257 °F, up to 302 °F, up to 464 °F
|
Media |
Abrasives,
Adhesives / Glue, Chemical Fluids, Food & Beverages, Fuels, Gases,
Hydraulic Fluids, Medical Fluids, Oil / Petroleum, Pharmaceutical Fluids,
Pneumatic Media, Steam, Water |
Minimum
Operating Temperature |
0
(and up) °C, 10 and up °C, -40 and up °C, -50 and up °C, -70 and up °C, 32
and up °F, -40 and up °F, 50 and up °F, -58 and up °F, -94 and up °F |
Outside
Diameter |
1
to 1-1/4 inch, 1/2 to 3/4 inch, 1/4 to 1/2 inch, 1-1/4 to 1-1/2 inch, 3/4 to
1 inch |
FAILURE OR IMPROPER
SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN
CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other
information from Parker-Hannifin Corporation, its subsidiaries and authorized
distributors provide product or system options for further investigation by
users having technical expertise. The user, through its own analysis and
testing, is solely responsible for making the final selection of the system and
components and assuring that all performance, endurance, maintenance, safety
and warning requirements of the application are met. The user must analyze all
aspects of the application, follow applicable industry standards, and follow
the information concerning the product in the current product catalog and in
any other materials provided from Parker or its subsidiaries or authorized
distributors. To the extent that Parker or its subsidiaries or authorized
distributors provide component or system options based upon data or
specifications provided by the user, the user is responsible for determining
that such data and specifications are suitable and sufficient for all
applications and reasonably foreseeable uses of the components or systems.
Tubing, Autoclave
Series - 20,000 PSI
Parker Autoclave's medium pressure tubing is capable of operating to 20,000 psi (1379 bar) and range in size from 1/16" to 1 1/2" tube size. Standard tubing is available in cold worked stainless steel
Parker
Autoclave's medium pressure cone and thread tube nipples are designed for use
with Parker Autoclave fittings and valves. These cone and thread tube nipples
are rated up to 20,000 PSI (1379 BAR). These manufactured, high quality tube
nipples are for rapid system installation make-up.
Parker Autoclave
supplies pre-cut, coned-and-threaded nipples in various sizes and lengths for
Autoclave high pressure valves and fittings. In addition to the standard
lengths listed in the catalog, nipples are available in any custom length.
Consult factory for further details.
Note: Caution
should be exercised when selecting medium pressure nipples since two series are
available: 15000 psi (1034.16 bar) and 20000 psi (1379 bar).
Markets:
• Oil and Gas
• Petrochemical
• Research
• Chemical
Features/Benefits:
• Working
pressures to 20,000 psi (1379 bar)
• Pre-cut cone
and thread connections designed to permit rapid installation
• Tubing sizes
are 1/4", 3/8", 9/16", 3/4", and 1-1/2"
• Tube nipples
are manufactured from cold worked 316 stainless steel
• Operating
temperatures from -423ºF (-252ºC ) to 1200ºF (649ºC)
• Available in
special materials
• Stock nipple
lengths from 3.0" (76.2 mm) to 12.0" (304.8 mm)
Applications:
• Medium Pressure
Test Panels
• Offshore Skid Panels
• Chemical
Injection
• Medium Pressure
Gas Systems
Application |
Hydraulic,
Instrumentation, Media Transfer, Suction / Vacuum |
Specifications
Met |
ASTM,
ISO |
Materials
of Construction |
6Mo,
904L, Alloy 625, Alloy 825, Alloy C-276, Duplex, Monel, Other Stainless
Steel, Stainless Steel, Super Duplex, Titanium |
Maximum
Operating Pressure |
34
(and over) bar, up to 34 bar, up to 7 bar, 500 and over psi, up to 100 psi,
up to 500 psi |
Maximum
Operating Temperature |
240
and over °C, up to 100 °C, up to 125 °C, up to 150 °C, up to 240 °C, up to
650 °C, up to 1200 °F, up to 212 °F, up to 257 °F, up to 302 °F, up to 464 °F
|
Media |
Abrasives,
Adhesives / Glue, Chemical Fluids, Food & Beverages, Fuels, Gases,
Hydraulic Fluids, Medical Fluids, Oil / Petroleum, Pharmaceutical Fluids,
Pneumatic Media, Steam, Water |
Minimum
Operating Temperature |
0
(and up) °C, 10 and up °C, -40 and up °C, -50 and up °C, -70 and up °C, 32
and up °F, -40 and up °F, 50 and up °F, -58 and up °F, -94 and up °F |
Outside
Diameter |
1
to 1-1/4 inch, 1/2 to 3/4 inch, 1/4 to 1/2 inch, 1-1/4 to 1-1/2 inch, 3/4 to
1 inch |
FAILURE OR IMPROPER
SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN
CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other
information from Parker-Hannifin Corporation, its subsidiaries and authorized
distributors provide product or system options for further investigation by
users having technical expertise. The user, through its own analysis and
testing, is solely responsible for making the final selection of the system and
components and assuring that all performance, endurance, maintenance, safety
and warning requirements of the application are met. The user must analyze all
aspects of the application, follow applicable industry standards, and follow
the information concerning the product in the current product catalog and in
any other materials provided from Parker or its subsidiaries or authorized
distributors. To the extent that Parker or its subsidiaries or authorized
distributors provide component or system options based upon data or
specifications provided by the user, the user is responsible for determining
that such data and specifications are suitable and sufficient for all
applications and reasonably foreseeable uses of the components or systems.