Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with Welcome to Supertechnical!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
Check Valves
Check Valves
Hi-Check Non Return Check Valve (10,000 PSI)
Parker's high performance non-return valves can offer the user a
cold working pressure rating up to 10,000 psi/689 bar maximum, with a cracking
pressure of 10 psi maximum.
Parker’s Hi Check
series high performance non-return valves are designed for unidirectional flow
control of fluids and gases in process instrumentation applications. There is a
choice of two check valve models, with cold working pressures of 10000 PSI (689
bar) and 6000 PSI (414 bar). Both check valves have an opening (or ‘cracking’)
pressure of 10 PSI (0.7 bar). These robust check valves feature a two-piece
metal seated body design to minimize any risk of leakage. The Parker check
valves are available with a choice of integral male or female NPT, or single-
or two-ferrule compression style ends, the compression ends enable users to
eliminate the use of taper threads and thread sealant – further reducing the
number of potential leakage paths and avoiding system contamination problems.
There is a comprehensive range of inlet and outlet connections, covering
imperial sizes of 1/4", 3/8” and 1/2", and metric sizes of 6 mm, 10
mm and 12 mm.
The check valves are
designed to meet the pressure and temperature requirements of ANSI/ASME
B.16.34, as limited by the seat materials. NACE compliant versions are
available. As standard, Hi Check valves are manufactured from 316 stainless
steel, with duplex and monel versions optionally available. For maximum
applications flexibility, there is an extensive choice of O-ring materials,
including FPM75 and V1238-95 fluorocarbon rubber, Buna-N, ethylene propylene
rubber and highly fluorinated fluorocarbon rubber.
Markets: |
Applications: |
• Oil and Gas Offshore • Oil and Gas Onshore • Petrochemical • Chemical • Power Generation Features/Benefits: • ANSI/ASME B.16.34 • Heat code traceable |
• Lubrication skids • Water Treatment • Chemical injection skids • Hydraulic systems for wellhead
control • Emergency shut down • Pumping packages • Gas booster systems • Test equipment |
C Series Check Valves
Parker’s C Series Check Valves are designed as a
compact, inline check valve. These check valves provide uni-directional flow
control of fluids and gases. To help prevent improper installation, all check
valves have a flow arrow label with the valve’s crack pressure rating
permanently attached. The availability of a wide range of seat materials
provide the system designer a variety of uses over a standard, general purpose
check valve.
CB Series Check Valves
Parker CB and CBF Series Check Valves are designed
for uni-directional flow control of fluids and gases. The
unique floating ball valve design handles
demanding services in power generation, chemical processing, oil/
gas production, and other demanding applications.
The CB/CBF Series are specifically designed to reduce
check valve maintenance and performance
requirements on dual fuel turbines. Specific issues include, but are not
limited to seat leakage, coking, repair and maintenance. All of these issues
directly affect turbine efficiency, impacting operating costs. The advanced
seat materials of the CB/CBF Series Check Valves are particularly suited for
higher temperature applications requiring high integrity leak rates and
re-sealing capabilities.
CO
Series Check Valves
Parker CO Series Check Valves are designed for
uni-directional flow control of fluids and gases in industries such as chemical
processing, oil and gas production and transmission, pharmaceutical, pulp and
paper, power and utilities. The CO Series Check Valve is particularly suitable
for applications requiring high integrity leak rates and re-sealing
capabilities.
LC
Series Lift Check Valves
Parker’s LC-Series Lift Check Valve has been
designed for a wide variety of temperature extremes found in power, chemical,
petrochemical, oil & gas, and laboratory applications. The LC-Series, ideal
for liquid service, has been designed to prevent flow in the reverse direction
to within 99.9% of forward flow. The gravity assisted poppet uses back pressure
to achieve a seal.
Check Valves
Hi-Check Non Return Check Valve (10,000 PSI)
Parker's high performance non-return valves can offer the user a
cold working pressure rating up to 10,000 psi/689 bar maximum, with a cracking
pressure of 10 psi maximum.
Parker’s Hi Check
series high performance non-return valves are designed for unidirectional flow
control of fluids and gases in process instrumentation applications. There is a
choice of two check valve models, with cold working pressures of 10000 PSI (689
bar) and 6000 PSI (414 bar). Both check valves have an opening (or ‘cracking’)
pressure of 10 PSI (0.7 bar). These robust check valves feature a two-piece
metal seated body design to minimize any risk of leakage. The Parker check
valves are available with a choice of integral male or female NPT, or single-
or two-ferrule compression style ends, the compression ends enable users to
eliminate the use of taper threads and thread sealant – further reducing the
number of potential leakage paths and avoiding system contamination problems.
There is a comprehensive range of inlet and outlet connections, covering
imperial sizes of 1/4", 3/8” and 1/2", and metric sizes of 6 mm, 10
mm and 12 mm.
The check valves are
designed to meet the pressure and temperature requirements of ANSI/ASME
B.16.34, as limited by the seat materials. NACE compliant versions are
available. As standard, Hi Check valves are manufactured from 316 stainless
steel, with duplex and monel versions optionally available. For maximum
applications flexibility, there is an extensive choice of O-ring materials,
including FPM75 and V1238-95 fluorocarbon rubber, Buna-N, ethylene propylene
rubber and highly fluorinated fluorocarbon rubber.
Markets: |
Applications: |
• Oil and Gas Offshore • Oil and Gas Onshore • Petrochemical • Chemical • Power Generation Features/Benefits: • ANSI/ASME B.16.34 • Heat code traceable |
• Lubrication skids • Water Treatment • Chemical injection skids • Hydraulic systems for wellhead
control • Emergency shut down • Pumping packages • Gas booster systems • Test equipment |
C Series Check Valves
Parker’s C Series Check Valves are designed as a
compact, inline check valve. These check valves provide uni-directional flow
control of fluids and gases. To help prevent improper installation, all check
valves have a flow arrow label with the valve’s crack pressure rating
permanently attached. The availability of a wide range of seat materials
provide the system designer a variety of uses over a standard, general purpose
check valve.
CB Series Check Valves
Parker CB and CBF Series Check Valves are designed
for uni-directional flow control of fluids and gases. The
unique floating ball valve design handles
demanding services in power generation, chemical processing, oil/
gas production, and other demanding applications.
The CB/CBF Series are specifically designed to reduce
check valve maintenance and performance
requirements on dual fuel turbines. Specific issues include, but are not
limited to seat leakage, coking, repair and maintenance. All of these issues
directly affect turbine efficiency, impacting operating costs. The advanced
seat materials of the CB/CBF Series Check Valves are particularly suited for
higher temperature applications requiring high integrity leak rates and
re-sealing capabilities.
CO
Series Check Valves
Parker CO Series Check Valves are designed for
uni-directional flow control of fluids and gases in industries such as chemical
processing, oil and gas production and transmission, pharmaceutical, pulp and
paper, power and utilities. The CO Series Check Valve is particularly suitable
for applications requiring high integrity leak rates and re-sealing
capabilities.
LC
Series Lift Check Valves
Parker’s LC-Series Lift Check Valve has been
designed for a wide variety of temperature extremes found in power, chemical,
petrochemical, oil & gas, and laboratory applications. The LC-Series, ideal
for liquid service, has been designed to prevent flow in the reverse direction
to within 99.9% of forward flow. The gravity assisted poppet uses back pressure
to achieve a seal.