Adapters and Couplings

  • Rs. 0.00

    • Product Code: Adapters and Couplings

    Adapters and Couplings


    Cone and Thread Type Fitting

     

    Parker Autoclave’s Medium and High pressure line of Adapters and Couplings provide system flexibility by providing a one piece fitting with two different end connections. The installer minimizes the number of overall connections.

     

    Product Overview

    Parker Autoclave's Cone and Thread Adapters and Couplings are designed for use with Parker Autoclave medium and high pressure tubing. These Adapters and Couplings are rated up from 15,000 PSI (1035 BAR) up to 150,000 PSI (10342 BAR). The male /female Adapters are designed to adapt a female connec¬tion to another size and/or type of connection without the need for additional couplings. In selecting an adapter involving two different sized connections, the larger connection should be on the male end where it is possible to maximize the mechani¬cal strength of the adapter.

    The Couplings are manufactured to permit the joining of any combina¬tion of standard size tubing or tubing and standard pipe with female-to-female couplings. The pressure rating of Parker Autoclave Couplings is based on the lower rated connection used.

     

    NOTE: NPT threads must be sealed using a high quality PTFE tape and/or PTFE paste product. Refer to thread sealant manufacturer’s instructions on how to apply thread sealant. Sealing performance may vary based on many factors such as pressure, temperature, media, thread quality, thread material, proper thread engagement and proper use of thread sealant. Customer should limit the number of times an NPT fitting is assembled and disassembled because thread deformation during assembly will

    result in deteriorating seal quality over time. When using only PTFE tape, consider using thread lubrication to prevent galling of mating parts

     

    Markets:

    Applications

    • Oil and Gas

    • Petrochemical

    • Research

    • Chemical

    • Power

     

    • Test Panels

    • Offshore Skid Panels

    • Chemical Injection

    • Specialty High Pressure Gas Systems

    • Research Systems

     

     

    Features:

    • Working pressures to 150,000 psi (10,342 bar)

    • Tubing sizes are 1/8”, 1/4", 3/8", 5/16”, 9/16", 3/4", and 1-1/2"

    • Connections include Speed Bite, C&T Medium and High Pressure , and NPT

    • Weep holes for safety and leak detection

    • Fittings manufactured from cold worked 316 stainless steel

    • Available in special materials


    Tech Specifications

    Performance Characteristics

     

    Fitting Type

    Cone and Thread

    Connection 1 Size

    1/8", 3/8", 1/2", 1/4", 9/16", 3/4" SpeedBite, Medium Pressure C&T, High Pressure C&T, Quick Set

    Connection 2 Size

    1/4", 3/8" SpeedBite, Medium Pressure C&T, High Pressure C&T, Quick Set

    Maximum Operating Pressure

    15,000, 20,000, 60,000 psi

    Materials of Construction

    316 Stainless Steel

    Body Style

    Male/Female Adapters, Couplings, QSS Male /Female Adapters

    Fitting Type

    Compression / Flareless

    Maximum Operating Pressure

    15,000, 10,000 psi

    1034, 689 bar

    Assembly

    Special Tool Required

    Connection Type

    W125 , SW250 , SW375 , SW500

    Shape

    Elbow, Tee, Cross, Straight Coupling , Bulkhead Couplings

    Materials of Construction

    316 Stainless Steel

    Maximum Tube Outside Diameter

    1/8, 1/4, 3/8, 1/2 inch

    3.18 , 6 , 10 , 12.70 mm

     

     

    P Series Fittings ( NPT Connections – 15K)

    Parker Autoclave Engineers P Series, Pipe Fittings are designed for liquid and gas applications. These high quality pipe fittings are available from 1/4" to 1" NPT to 15,000 psi and temperatures to 400°F (204°C)

    For the NPT (Pipe) Connections, the threads must be sealed using a high quality PTFE tape and/or paste product. Refer to thread sealant manufacturer's instructions on how to apply thread sealant. Sealing performance may vary based on many factors such as pressure, temperature, media, thread quality, thread material, proper thread engagement and proper use of thread sealant.

     

    Customer should limit the number of times an NPT fitting is assembled and disassembled because thread deformation during assembly will result in deteriorating seal quality over time. When using only PTFE tape, consider using thread lubrication to prevent galling of mating parts.

     

    Markets:

     

    Applications

    • Oil and Gas

    • Chemical

    • Petrochemical

     

    • Chemical Injection Skids

    • Wellhead Control Panels

    • Testing Panels

     

     

    Features:

    Available sizes are 1/4", 3/8", 1/2", 3/4" and 1" NPT

    Fittings and tubing manufactured from cold worked 316 stainless steel.

    Operating Temperatures from 0°F (-17.8°C) to 400°F (204°C)

    Body Style -  Elbow, Tee, Cross, Coupling, Bulkhead Coupling, Plug, Street Elbow, Male Elbow, Male Tee, Street Tee, Male Branch Tee, Hex Close Nipples

    Materials -  316 Stainless Steel

    Adapters and Couplings


    Cone and Thread Type Fitting

     

    Parker Autoclave’s Medium and High pressure line of Adapters and Couplings provide system flexibility by providing a one piece fitting with two different end connections. The installer minimizes the number of overall connections.

     

    Product Overview

    Parker Autoclave's Cone and Thread Adapters and Couplings are designed for use with Parker Autoclave medium and high pressure tubing. These Adapters and Couplings are rated up from 15,000 PSI (1035 BAR) up to 150,000 PSI (10342 BAR). The male /female Adapters are designed to adapt a female connec¬tion to another size and/or type of connection without the need for additional couplings. In selecting an adapter involving two different sized connections, the larger connection should be on the male end where it is possible to maximize the mechani¬cal strength of the adapter.

    The Couplings are manufactured to permit the joining of any combina¬tion of standard size tubing or tubing and standard pipe with female-to-female couplings. The pressure rating of Parker Autoclave Couplings is based on the lower rated connection used.

     

    NOTE: NPT threads must be sealed using a high quality PTFE tape and/or PTFE paste product. Refer to thread sealant manufacturer’s instructions on how to apply thread sealant. Sealing performance may vary based on many factors such as pressure, temperature, media, thread quality, thread material, proper thread engagement and proper use of thread sealant. Customer should limit the number of times an NPT fitting is assembled and disassembled because thread deformation during assembly will

    result in deteriorating seal quality over time. When using only PTFE tape, consider using thread lubrication to prevent galling of mating parts

     

    Markets:

    Applications

    • Oil and Gas

    • Petrochemical

    • Research

    • Chemical

    • Power

     

    • Test Panels

    • Offshore Skid Panels

    • Chemical Injection

    • Specialty High Pressure Gas Systems

    • Research Systems

     

     

    Features:

    • Working pressures to 150,000 psi (10,342 bar)

    • Tubing sizes are 1/8”, 1/4", 3/8", 5/16”, 9/16", 3/4", and 1-1/2"

    • Connections include Speed Bite, C&T Medium and High Pressure , and NPT

    • Weep holes for safety and leak detection

    • Fittings manufactured from cold worked 316 stainless steel

    • Available in special materials


    Tech Specifications

    Performance Characteristics

     

    Fitting Type

    Cone and Thread

    Connection 1 Size

    1/8", 3/8", 1/2", 1/4", 9/16", 3/4" SpeedBite, Medium Pressure C&T, High Pressure C&T, Quick Set

    Connection 2 Size

    1/4", 3/8" SpeedBite, Medium Pressure C&T, High Pressure C&T, Quick Set

    Maximum Operating Pressure

    15,000, 20,000, 60,000 psi

    Materials of Construction

    316 Stainless Steel

    Body Style

    Male/Female Adapters, Couplings, QSS Male /Female Adapters

    Fitting Type

    Compression / Flareless

    Maximum Operating Pressure

    15,000, 10,000 psi

    1034, 689 bar

    Assembly

    Special Tool Required

    Connection Type

    W125 , SW250 , SW375 , SW500

    Shape

    Elbow, Tee, Cross, Straight Coupling , Bulkhead Couplings

    Materials of Construction

    316 Stainless Steel

    Maximum Tube Outside Diameter

    1/8, 1/4, 3/8, 1/2 inch

    3.18 , 6 , 10 , 12.70 mm

     

     

    P Series Fittings ( NPT Connections – 15K)

    Parker Autoclave Engineers P Series, Pipe Fittings are designed for liquid and gas applications. These high quality pipe fittings are available from 1/4" to 1" NPT to 15,000 psi and temperatures to 400°F (204°C)

    For the NPT (Pipe) Connections, the threads must be sealed using a high quality PTFE tape and/or paste product. Refer to thread sealant manufacturer's instructions on how to apply thread sealant. Sealing performance may vary based on many factors such as pressure, temperature, media, thread quality, thread material, proper thread engagement and proper use of thread sealant.

     

    Customer should limit the number of times an NPT fitting is assembled and disassembled because thread deformation during assembly will result in deteriorating seal quality over time. When using only PTFE tape, consider using thread lubrication to prevent galling of mating parts.

     

    Markets:

     

    Applications

    • Oil and Gas

    • Chemical

    • Petrochemical

     

    • Chemical Injection Skids

    • Wellhead Control Panels

    • Testing Panels

     

     

    Features:

    Available sizes are 1/4", 3/8", 1/2", 3/4" and 1" NPT

    Fittings and tubing manufactured from cold worked 316 stainless steel.

    Operating Temperatures from 0°F (-17.8°C) to 400°F (204°C)

    Body Style -  Elbow, Tee, Cross, Coupling, Bulkhead Coupling, Plug, Street Elbow, Male Elbow, Male Tee, Street Tee, Male Branch Tee, Hex Close Nipples

    Materials -  316 Stainless Steel

    Write a review

    Note: HTML is not translated!
        Bad           Good
    ×